User Manual

62 In-Camera Filter Module IFM-1
2. Carefully screw the Ground Glass/Frameglow tool (1) into the filter ring’s (2) thread
hole in the 12 o'clock position (1).
3. Pull the filter (2) from the bottom ring in the camera's PL mount. If the filter position
is held by an IFM Empty Filter Frame, remove it likewise.
4. Clean the removed filter and stow it properly in its individual box and the storage
case. If the filter position was held by an IFM Empty Filter Frame, store it likewise
(in case the camera is no longer shimmed for IFM-1 in the future).