User Manual

Camera Controls 73
Fig. 23: Audio screen
Gain can be applied to the audio channels by turning the jogwheel to set both
channels, or by pressing the CH 1+, CH 1-, CH 2+ and CH 2- buttons. The amount of
gain applied by the camera is indicated next to the levels as light gray numbers.
NOTICE
When adjusting audio input levels, a "clicking" noise can be heard on audio outputs.
Adjustment of audio levels therefore is disabled during recording.
Press the OPTIONS button to open the AUDIO IN>OPTIONS screen and set audio
parameters.
Fig. 24: AUDIO IN>OPTIONS screen
Option Description
Record Turns audio recording On or Off.
If audio recording is switched off, no audio is recorded
internally, HD-SDI contains no audio and Audio out is
muted.
Channel 1 level Manual allows the user to manually apply gain to the in-
put signal on channel 1 to reach a correct level.
Unity matches a 4 dBu input signal to -20 dBFS. This
setting leaves enough headroom for recording and
avoids audio clipping. When Unity is selected, audio lev-
els cannot be adjusted by the user.