User Manual

74 Camera Controls
Option Description
Channel 2 level Manual allows the user to manually apply gain to the in-
put signal on channel 2 to reach a correct level.
Unity matches a 4 dBu input signal to -20 dBFS. This
setting leaves enough headroom for recording and
avoids audio clipping. When Unity is selected, audio lev-
els cannot be adjusted by the user.
Channel 1 source Select the left or right input signal as the source for
Channel 1.
Channel 2 source Select the left or right input signal as the source for
Channel 2.
Soundroll (=Tape) Enter a name for the sound roll (also known as Tape
in the menus of some recorders) of an external audio
recorder, for easier sound synching in post-production.
The name will be written to the FCP XML file and the
Avid Log Exchange (ALE) file on the recording media.
Fig. 25: Audio out screen
Press the AUDIO OUT button to open the AUDIO OUT>OPTIONS screen where the
global volume for both Audio out channels can be adjusted. The OPTIONS button
opens a list of AUDIO OUT options.
Fig. 26: AUDIO OUT>OPTIONS
Left out Sets which channel is routed to the left output.
Right out Sets which channel is routed to the right output.