User Manual

Camera Controls 93
Peaking on MON
OUT 1/2/3
Determines whether peaking is applied to played back
clips on MON OUT. Unless needed to check focus, we
recommend to leave this option off as it can confuse
others into thinking the peaking indication is a recorded
image artifact.
Peaking on EVF Determines whether peaking is applied to played back
clips on EVF. Unless needed to check focus, we recom-
mend to leave this option off as it can confuse others in-
to thinking the peaking indication is a recorded image
artifact.
CLIPLIST
Press the CLIPLIST button to open the CLIPLIST screen and access all the clips
recorded internally.
To play a clip from the cliplist:
1. Press the CLIPLIST button.
2. Use the jogwheel to select a clip.
3. Press the jogwheel to load the selected clip.
4. Press the jogwheel to play the selected clip.
Additional CLIPLIST screen information:
•
number of selected and total number of clips on the media
•
codec of selected clip
•
duration of selected clip
•
circled or not
Fig. 39: CLIPLIST screen
NOTICE
Not all clip formats can be played back in all camera modes. If a clip cannot be
played back in the current camera mode, it appears grayed out. Switch the camera
to the mode that was used for shooting to play back those clips.
When a clip with audio tracks is selected for playback, the audio tracks will be played
back as well. In-camera playback may render a short audio distortion at the beginning
or end of the clip, which is not part of the recorded audio tracks.
Playback and ARRI Look File 2 files
During playback, the camera makes a distinction between clips recorded in
ARRIRAW, Log C, or Look processing.