User Manual

136 Home screen and camera menu
You can import lens tables into the camera from a USB medium anyway. For more
information, see "Working with lists", page 51.
For information on creating the required folder structure on your USB memory stick,
see "Preparing USB medium", page 86.
Note: It is possible to load a lens table even when an LDS lens is attached. The LDA
values calculated from motor positions and lens tables take precedence over the
values communicated by the lens itself. This can be necessary, if the lens data from
the lens is faulty or imprecise.
NOTICE
Please note that as soon as a LDA table is activated, the LDS contacts of the lens
mount are switched off. There is no need to switch the mount off manually when
using LDA.
Cooke /i support
The camera supports the Cooke /i protocol for lenses running firmware versions
according to the following table.
Lens type FW version
S4 /i Prime lens (10-bit) 0.29 or higher
S4 /i Prime lens (12 bit) 0.39 or higher
S4 /i Zoom lens (10 bit) 1.29 or higher
S4 /i Zoom lens (12 bit) 1.39 or higher
The firmware version can be retrieved from the lens with the Cooke Viewer Lens
Display program. For detailed information, please contact Cooke Optics directly.
7.14.2.1 Adding lens tables from lens data archive (LDA)
1. Choose MENU > Electronic Control System (ECS) > Lens data > LDA.
A list with lens tables is displayed.
2. Press USB or DEFAULTS to select a lens table from the included lens tables.
Note: Only lens tables created with WCU-4 software version 2.22.22 or later are
supported.
A list with lens tables is displayed.
3. Some lens tables contain different scale classes for the same model. The scale
class of an individual lens is engraved on the housing. If required: To select a
scale class, press the jogwheel.
4. To add the selected lens table to favorites without activating the lens table, press
ADD TO FAV.
5. Add the selected lens table to favorites and activate it by pressing FAV.+USE.
6. Activate the selected lens table without adding it to favorites by pressing USE.
7.14.2.2 Choosing a lens from the favorites list
The favorites list shows all lenses that have been added before, including the selected
scale class.
1. Choose MENU > Electronic Control System (ECS) > Lens data > FAVORITES.
A list with favorite lens data is displayed.