User Manual

Getting started 43
Installing a lens mount (here: PL mount)
WARNING!
Condensation! Risk of electric shock and damage!
Humidity may ingress due to misinstalled lens mounts!
When installing a lens mount, always align and attach properly; never apply force.
Hand-tighten all screws crosswise before final tightening.
Always tighten crosswise with the prescribed tool.
1
2
1. Properly align the two guiding pins (1) for correct lens mount fit (2).
2. Note: Never apply force, align the guiding pins instead.
1
1
3. Crosswise, hand-tighten all four screws (1).
4. Only then, tighten all screws crosswise with an Allen key.
5. Note: Always store the camera with a lens mount properly installed and capped.