User Manual

Media usage 49
6.2 Inserting and removing USB medium
2
3
1
1. Open the media lid (1).
2. Connect a FAT-formatted USB stick (3) to the camera (2).
The USB memory stick is now ready for use with the camera.
You can remove the stick from the camera without unmounting it.
For information on preparing the USB memory stick for use with the camera, see
"Preparing USB medium", page 86.
NOTICE
The camera only supports USB memory sticks or pendrives, FAT-formatted with
MBR partition table and with a maximum capacity of 16GB. Hard drives or similar
will not be recognized.