User Manual

Fixture Menu
28
SETUP
DMX
PROT P.001...P.015 Set the DMX mode
LSIG
HOLD The DMX values are held when DMX signal is lost
BOUT Product douses when DMX signal is lost
H2MF Product douses 2 min after DMX signal is lost
CHAN 1...512[-Mode]
Set the DMX start address. Max. start address = 512 -
channels used by the DMX mode chosen.
FACT
NO Do not load the factory defaults
YES Load the factory defaults
DEMO
ON Activate the demo sequence (see page 24)
OFF De-activate the demo sequence
INDC
ON
The status indicators and the illumination of the
display remain ON
OFF
The status indicators and the illumination of the dis-
play switch OFF
FAN
OFF Fan AUS
LOW Fan mode LOW
HI Fan mode HI
ALOW Fan mode ALOW
AHI Fan mode AHI
VARI Fan mode VARI
PASS Fan mode PASS
HI45 (only L7 Active) Fan mode HI45
Level 1 Level 2 Level 3 Level 4 Description (Default = bold)