User Manual

ARRI Lighting Service Manager
32
Manufacturer commands
ARRI Lighting Service Manager
Please find information about the features and the functionality of the ARRI Lighting Service Manager in the user manual for the
ARRI Lighting Service Manager, which can be downloaded with the ARRI Lighting Service Manager software-bundle from the
ARRI web site www.arri.com/lightingsoftware free of charge.
Command Description GET SET
RDM Fan Mode
PID: 0x8001
Changes the FAN mode of the fixture
- this message supports Set and Get commands
- the first data byte is used to show / change the fan mode
USER_FAN_MODE_LOW = 1
USER_FAN_MODE_VARI = 2
USER_FAN_MODE_HI45 = 3
XX
RDM Status LED
PID: 0x8002
Switch on /off indication LEDs and LCD back light
- this message supports Set and Get commands
- the first data byte is used to switch indication LEDs on and off
LEDs and LCD back light on = 0
LEDs and LCD back light off = 1
XX
Supported values from -1 to +1
RDM DMX Signal Lost Mode
PIS: 0x8005
If the DMX signal gets lost or the DMX device is unplugged the LED fixture holds the
last valid signal, or it holds the last valid signal for two minutes and then douses or
switches off immediately.
Supported values:
0 -> hold
1 -> hold 2 minutes
3 -> switch off
XX