SkyPanel® S360-C USER MANUAL L5.
© 2017 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved. Information subject to change without notice. ARRI and all affiliated companies disclaim liability for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this document.
Introduction .................................................................................................................................................... 5 Content Content Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thank you for selecting the SkyPanel LED soft light from ARRI. The SkyPanel is a compact, ultra-bright and high-quality LED soft light. It is much more efficient than a soft light with a conventional light source. Introduction Introduction The SkyPanel combines the advantages of the LED technology with the characteristic of a conventional soft light. The SkyPanel integrates seamless into established working practice. Lighting designers as well as Studios don’t need to change its workflow.
Introduction Control All functions of the SkyPanel S360-C are controllable through DMX, CRMX, Art-Net or sACN. The SkyPanel is also fully RDM compatible (via DMX, CRMX and Art-Net with suitable controllers) and is equipped with an RDM feedback channel for reporting all set parameters including system status. Fixture Menu For location applications the SkyPanel is equipped with a fixture menu for manual adjustment of intensity, color temperature and plus/minus green as well as hue and saturation.
Fixture Menu Fixture Menu Overview 11 10 9 1 8 2 7 3 4 5 6 Features of the Fixture Menu POWER-LED (1): Color Indication Green Fixture switched on. No error. No color Fixture switched off. DATA-LED (2): Color Indication Blue The fixture receives a valid DMX signal. Blue / green The fixture receives a valid CRMX (WDMX) signal.
Fixture Menu STATUS-LED (3): Color Indication Green No error. Normal temperature. Red flashing (0,5s rhythm)* Warning fixture over temperature (only with fan modes LOW and High Speed). Red* Fixture over temperature. Change from red to green* Red flashing (0,25s Rhythm) Fixture normal temperature. * Calibration data not loaded.
The BACK button closes a sub menu and aborts an action (Escape). Compared to the MENU button (10) the BACK button only closes the sub menu, but not the fixture menu. Press BACK long to display the last used menus. Fixture Menu BACK (11) To lock the fixture menu • Press I/S in the home screen for 5 seconds to lock all buttons and knobs. Use the feature to prevent an accidental change of settings. • The word „LOCKED“ appears on the display when locked.
Fixture Menu To set the Color in RGBW Mode) Use the MODE button to activate the RGBW color mode. The central rotary knob (5) has no function in RGBW mode. Use the right rotary knob (6) to select the functionality of the encoder I/S (4). Dependent on the selection of the right rotary knob, I/S is used to set the overall intensity of the red, green, blue and white color. Please note the setting „Direct Control“ or „RGBW Color Space (see page 11). You can store the RGBW color as a preset.
Effects are de-activated in High Speed mode. When you try to call up an effect in High Speed mode, the warning „Not Possible: High Speed Active“ is displayed. When you try to activate the High Speed mode with an effect active, the warning „Not Possible: Effect Active“ is displayed. De-activate the effect or the High Speed mode to change the control mode. Fixture Menu NOTICE To set a special control mode: 1.Press the MENU button (10) to open the fixture menu. 2.Turn I/S, until „Light Control“ is selected.
Fixture Menu To Activate and De-activate the Calibrated RGBW Color Space: 1.Press the MENU button (10) to open the fixture menu. 2.Turn I/S, until „Light Control“ is displayed. Press I/S to open the menu. 3.Turn I/S, until „RGBW Color Space“ is displayed. Press I/S to open the menu. 4.Select „Direct Control“ to generate colors with optimized intensity. Select „Calibrated Color“ to generate a calibrated color. 5.Press MENU to close the menu.
Fixture Menu To set the DMX-Signal-Loss Behavior: 1.Press the MENU button (10) to open the fixture menu. 2.Turn I/S, until „DMX Settings“ is displayed. Press I/S to open the menu. 3.Turn I/S, until „DMX Loss Behavior“ is displayed. Press I/S to open the menu. 4.Select the setting by turning I/S. Press I/S to confirm the setting. 5.Press MENU to close the menu. Wireless DMX The SkyPanel S360-C is equipped with a wireless DMX receiver supporting the LumenRadio CRMX protocol.
Fixture Menu Lighting Effects The SkyPanel offers an effect library with a wide variety of lighting effects used on set or in a TV studio. The SkyPanel replaces many special effect devices with its unique effect library. You can call up all effects using the fixture menu or via DMX, Art-Net or sACN. Every effect offers specific parameters. A lighting effect can be stored in a preset slot for quick access at a later point. To select and activate an effect: 1.
Cop Car Creates an on-board blue and red flashing effect to mimic a police car, an ambulance or a fire brigade. Do not use the effect in public areas without permission. Parameters • Color combination • Flash pattern Fixture Menu • Offset • Sync Fire Creates a flickering fire effect. Parameters: • CCT range • Flicker speed Fireworks Bright flashes of color and have a quick start and fade to zero intensity.
Fixture Menu Paparazzi Effect that mimics a flash bulb or modern camera flash. Parameters: • CCT • Flash type • Frequency Pulsing A pulsing or throbbing effect where the color and speed can be set. Parameters: • CCT • Green-Magenta point • Cross fade • Color • Saturation • Frequency • Span Television Creates an on-board TV effect. Cool CCT that changes intensity every few seconds.
Light Strobe Mode X Lightning X X Paparazzi X X Pulsing X X Television Rotary Knob Parameter Central Speed Central Normal functionality Right Normal functionality Central Frequency Central CCT range Right Speed Right Green-Magenta point Central Frequency Central CCT range Right Flash bulb Right Green-Magenta point Central Normal functionality Central Span Right Normal functionality Right Frequency Central CCT range Right Speed Fixture Menu Effect When changing a para
Fixture Menu Preset Lists The fixtures preset list can be saved to an USB memory stick and be uploaded to another SkyPanel. NOTICE Disconnect all DMX cables from the product before using an USB memory stick. The data transfer between the product and the USB memory stick might be disturbed due to interferences. The USB-A port can power small USB devices. The maximum current is 500 mA @ 5V. Do not overload the USB-A port. To Save a preset List: 1.
For diagnosis purpose you might be asked to send the error and service log to the ARRI service. The log files can be downloaded to an USB memory stick. The file name contains the date, time and serial number of the fixture. To save the log files: 1.Connect an USB memory stick to the USB-A connector of the SkyPanel. 2.Press the MENU button (10) to open the fixture menu. 3.Turn I/S, until „USB Functions“ is selected. Press I/S to open the menu. 4.Turn I/S, until „Save Error Log“ is selected.
Fixture Control Fixture Control The SkyPanel offers, depending on the model, up to 23 control modes. Use the 8 bit modes with basic controllers like dimmer consoles. ARRI recommends the use of the 16 bit modes in combination with controllers supporting 16 bit resolution to obtain best results. The high resolution provides smooth dimming and precise color adjustments.
The SkyPanel contains a light effect engine with 13 different light effects. Activating a light effect is very easy. Just activate a light effect via the fixture menu, DMX, Art-Net or sACN and set the parameters to get exactly the effect you need. Please find a detailed description of all modes in chapter “Protocol” on page 30.
Art-Net and sACN Web Server The SkyPanel provides a web page accessible via http, when connected to a network. Type in the IP address of the SkyPanel in your web browser to open the web page and change the settings listed below. The Web Server can also be found by using a Bonjour service to discover the fixture and open the Web Server page without needing to know the IP address. NOTICE Always use the latest version of your web browser.
From Firmware-Version 3.0 Open and close the fixture menu the MENU button. BACK closes a sub menu and aborts an action. Turn INTENSITY / SELECTOR to scroll. Press INTENSITY / SELECTOR to select an item Level 1 Level 2 Level 3 DMX Address 001 - 512 Start address DMX Protocol P1 - P23 Protocol (see page 30) Hold Last Command Fixture holds the last received control values Black Out Fixture douses the dimmer Hold 2 Min Fade Out Hold the last received values for 2 min.
Overview of the Fixture Menu Level 1 Level 2 Level 3 Level 4 Default Explanation (default setting = bold) Default frequency (highest frequency) Frequency 1 Frequency 2 Frequency 3 Light Control (cont.
Level 2 Level 3 Automatic Explanation (default setting = bold) Accepts both protocols.
Overview of the Fixture Menu Level 1 Fixture Info Factory Reset Level 3 Level 4 Explanation (default setting = bold) System Ready No error Error message (see „Safety and Installation manual“) Light Engine Temp. xx.x °C xx.x °F Recent light engine temperature Hour Counter xxh - Light Engine yyh - System Working hours of the light engines and of the system since production of the fixture Battery Status x.y V Recent voltage of an external battery Fixture Serial No. L1.
From Firmware 3.2. Command Description GET SET Discover Unique Branch Searches RDM device X X Discover Mute Mutes the RDM device, no response messages X X Discover Unmute Activates device for response messages X X Supported Parameters Shows a list of all supported RDM commands X Parameter Description Shows a list of commands that are not standard RDM commands, mostly commands from manufacturer.
RDM Commands RDM Command Extensions (continued) Command Description GET SET Display Invert Rotates the display content 180° (only MKII) X X Display Level Set the display contrast (only MKII) X X Real Time Clock Get / set time and date (only L10 and SkyPanel) X X Queued Message Get / set message X X Curve Get / set dimming curve (only SkyPanel) X Curve Description Get / set curve description X List Interfaces Interface Label Interface Hardware Address Type1 IPV4 Current Address IPV
Command Description GET SET RDM IP Address 0x800A Get / set IP address X X RDM IP Subnet 0x800B Get / set subnet mask X X RDM IP Gateway 0x800C Get / set Gateway address X X RDM IP DNS1 0x800D Get / set DNS1 address X X RDM IP DNS2 0x800E not used RDM Error Mode Display 0x800F Get / set error mode display (only MKII) normal = 0 hidden = 1 X X RDM RGBW PLASA Mode 0x810 Get / set calibrated color space (PLASA mode) off = 0 on = 1 X X RDM Frequency 0x8011 Get / set PWM frequency
Protocol Protocol Protocol V4.3 is set as default. Use the ALSM to change to the protocol version. ARRI recommends to reserve additional channels which are required in V4.3 for each fixture when using a protocol version below V4.3. This way you do not need to change the patch when you want to use additional features which became available with protocol V4.3. From Firmware-Version 3.
Channel Depending on DMX mode Value Percent 0 – 11 0–4 12 – 23 24 – 35 36 – 47 48 – 59 60 – 71 72 – 83 84 – 95 96 – 107 108 – 119 120 – 131 5–9 10 – 14 15 – 18 19 – 23 24 – 28 29 – 33 34 – 37 38 – 42 43 – 47 48 – 51 132 – 143 144 – 155 156 – 167 168 – 179 180 – 191 192 – 203 204 – 215 216 – 227 228 – 239 240 - 255 52 – 56 57 – 61 62 – 65 66 – 70 71 – 75 76 – 80 81 – 84 85 – 89 90 – 94 95 - 100 Function Preset No effect User Defined Presets Preset 01 Preset 02 Preset 03 Preset 04 Preset 05 Preset 0
Protocol Mode 2: CCT, 8 bit Resolution per Function Channel Value 0-100 Master Intensity 0 % → 100% (open) 0-255 0-100 Color temperature CCT 2.800 K → 10.
Channel Value 0-100 Master Intensity 0 % → 100% (open) 0-255 0-100 Intensity red 0% → 100% 0-255 0-100 Intensity green 0% → 100% 0-255 0-100 Intensity blue 0% → 100% 0-255 0-100 Intensity white 0% → 100% 0-9 10-57 58-105 106-153 154-201 202-249 250-255 0-3 4-22 23-41 42-60 61-78 79-97 98-100 Fan Control Use fixture setting Quiet Mode Variable Mode High Temp Mode Normal Mode (only S360-C) Fan max.
Protocol Mode 6: CCT & RGBW, 16 bit Resolution per Function Channel Value HI LO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Reverts to fixture setting when signal lost 18 19-20 34 Percent Function 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-65.535 0-100 Color temperature CCT 2.800 K → 10.
Channel Value HI LO 1 2 3 4 5 6 7 Reverts to fixture setting when signal lost Percent Function 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-65.535 0-100 Color temperature CCT 2.800 K → 10.
Protocol Mode 9: RGBW, 16 bit Resolution per Function Channel Value HI LO 1 2 3 4 5 6 7 8 9 10 11 Reverts to fixture setting when signal lost Percent Function 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-65.535 0-100 Intensity red 0% → 100% 0-65.535 0-100 Intensity green 0% → 100% 0-65.535 0-100 Intensity blue 0% → 100% 0-65.
Channel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Reverts to fixture setting when signal lost 16 17-18 Value Percent Function 0-255 0-100 Master Intensity coarse 0 % → 100% (open) 0-255 0-100 Master Intensity fine 0-255 0-100 Color temperature CCT coarse 2.800 K → 10.
Protocol Mode 12: CCT, Coarse / Fine per Function Channel 1 2 3 4 5 6 Reverts to fixture setting when signal lost 7 8-9 38 Value Percent Function 0-255 0-100 Master Intensity coarse 0 % → 100% (open) 0-255 0-100 Master Intensity fine 0-255 0-100 Color temperature CCT coarse 2.800 K → 10.
Channel 1 2 3 4 5 6 7 8 9 10 11 Reverts to fixture setting when signal lost 12 13-14 Value Percent Function 0-255 0-100 Master Intensity coarse 0 % → 100% (open) 0-255 0-100 Master Intensity fine 0-255 0-100 Color temperature CCT coarse 2.800 K → 10.
Protocol Mode 14: RGBW, Coarse / Fine per Function Channel Value 0-100 Master Intensity coarse 0 % → 100% (open) 0-255 0-100 Master Intensity fine 0-255 0-100 Intensity red coarse 0% → 100% 0-255 0-100 Red fine 0-255 0-100 Intensity green coarse 0% → 100% 0-255 0-100 Green fine 0-255 0-100 Intensity blue coarse 0% → 100% 0-255 0-100 Blue fine 0-255 0-100 Intensity white coarse 0% → 100% 0-255 0-100 White fine 0-9 10-57 58-105 106-153 154-201 202-249 250-255 0-3 4-22 23-41 42
Channel 1 2 3 4 Value Percent 0-255 0-100 Master Intensity 0 % → 100% (open) 0-128 129-255 0-50 51-100 Gel 1,CCT Selection 3.200 K 5.600 K 0-128 0-50 129-170 51-67 171-255 68-100 Gel 1, Color Matching Best Color Color quality optimized Brightest Color brightness opt. No Color Gel 0-50 51-100 Gel 1, Brand Category on ch. 5 Gel on ch. 6 Rosco LEE Filters 0-128 129-255 0-50 0-20 51-101 21-39 102-152 40-60 153-203 61-80 204-255 81-255 Gel 1, category Manufacturer on ch.
Protocol Channel Value Percent 0-50 0-20 51-101 21-39 102-152 40-60 153-203 61-80 204-255 81-255 Gel 1, category Manufacturer on ch.
Channel Value HI LO 1 2 3 4 5 Percent 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-128 129-255 0-50 51-100 Gel 1,CCT Selection 3.200 K 5.600 K 0-128 0-50 129-170 51-67 171-255 68-100 Gel 1, Color Matching Best Color Color quality optimized Brightest Color brightness opt. No Color Gel 0-50 51-100 Gel 1, Brand Category on ch. 5 Gel on ch.
Protocol Channel Value Percent 0-50 0-20 51-101 21-39 102-152 40-60 153-203 61-80 204-255 81-255 Gel 1, category Manufacturer on ch.
Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 37 38 - 39 40 - 41 42 - 43 44 - 45 46 - 47 48 - 49 50 - 51 52 - 53 54 - 55 56 - 57 58 - 59 60 - 61 62 - 63 64 - 65 66 - 255 Full CTB 3/4 CTB 1/2 CTB 1/3 CTB 1/4 CTB 1/8 CTB Double CTB Full CTO 3/4 CTO 1/2 CTO 1/4 CTO 1/8 CTO Double CTO Full CTS 1/2 CTS 1/4 CTS 1/8 CTS Full Plusgreen 1/2 Plusgr
Protocol Category 2, Rosco, CalColor Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 37 38 - 39 40 - 41 42 - 43 44 - 45 46 - 47 48 - 49 50 - 51 52 - 53 54 - 55 56 - 57 58 - 59 60 - 61 62 - 63 64 - 65 66 - 255 15 Blue 30 Blue 60 Blue 90 Blue 7 Cyan 15 Cyan 30 Cyan 60 Cyan 90 Cyan 15 Green 30 Green 60 Green 90 Green 15 Yellow 30 Yellow 60 Ye
Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 37 38 - 39 40 - 41 42 - 43 44 - 45 46 - 47 48 - 49 50 - 51 52 - 53 54 - 55 56 - 57 58 - 59 60 - 61 62 - 63 64 - 65 66 - 67 68 - 69 70 - 71 72 - 73 74 - 75 76 - 77 78 - 79 80 - 81 82 - 83 84 - 85 86 - 87 88 - 89 90 - 91 92 - 255 Bastard Amber Pale Bastard Amber No Color Straw Pale Gold Daffodil
Protocol Category 1, LEE Color Correction Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 48 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 37 38 - 39 40 - 41 42 - 43 44 - 45 46 - 47 48 - 49 50 - 51 52 - 53 54 - 55 56 - 57 58 - 59 60 - 61 62 - 63 64 - 65 66 - 67 68 - 69 70 - 71 72 - 73 74 - 75 76 - 77 78 - 255 Double CTB Full CTB 3/4 CTB 1/2 CTB 1/4 CTB 1/8 CTB Double CTO Full CTO 3/4
Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 37 38 - 39 40 - 41 42 - 43 44 - 45 46 - 47 48 - 49 50 - 51 52 - 53 54 - 55 56 - 57 58 - 59 60 - 61 62 - 63 64 - 65 66 - 67 68 - 69 70 - 71 72 - 73 74 - 75 76 - 77 78 - 79 80 - 81 82 - 83 84 - 85 86 - 87 88 - 89 90 - 91 92 - 93 94 - 95 96 - 97 98 - 99 100 - 101 102 - 103 104 - 105 106 - 107 108
Protocol Category 2, LEE Color Filters, continued Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 116 - 117 118 - 119 120 - 121 122 - 123 124 - 125 126 - 127 128 - 129 130 - 131 132 - 133 134 - 135 136 - 137 138 - 139 140 - 141 142 - 143 144 - 145 146 - 147 148 - 149 150 - 151 152 - 153 154 - 155 156 - 157 158 - 159 160 - 161 162 - 163 164 - 165 166 - 167 168 - 169 170 - 171 172 - 173 174 - 175 176 - 177 178 - 255 Pale Green Summer Blue Pale Violet Pale Navy Blue No
Channel 8 bit: Gel 1: 6 Gel 2: 12 16 bit: Gel 1: 6 Gel 2: 14 Value Gel Name Number 0-1 2-3 4-5 6-7 8-9 10 - 11 12 - 13 14 - 15 16 - 17 18 - 19 20 - 21 22 - 23 24 - 25 26 - 27 28 - 29 30 - 31 32 - 33 34 - 35 36 - 255 Cosmetic Peach Cosmetic Silver Rose Cosmetic Rouge Cosmetic Highlight Cosmetic Silver Moss Cosmetic Aqua Blue Lily Frost Shanklin Frost Half Shanklin Frost Durham Daylight Frost Hampshire Rose Durham Frost Soft Amber Key 1 Soft Amber Key 2 Moroccan Frost Blue Diffusion Blue Frost Daylight
Protocol Mode 18: X,Y Coordinates, 8 bit Resolution per Function Channel 1 2 3 4 5 6 7 8 Reverts to fixture setting when signal lost. 9 10-11 52 Value Percent Function 0-255 0-100 Master Intensity 0 % → 100% (open) 0-255 0-100 X1 Coordinate 0.0 → 0.8 0-255 0-100 Y1 Coordinate 0.0 → 0.8 0-255 0-100 Xfade X1, Y1 → X2, Y2 0-255 0-100 X2 Coordinate 0.0 → 0.8 0-255 0-100 Y2 Coordinate 0.0 → 0.
Channel Value HI LO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Reverts to fixture setting when signal lost. 15 16 - 17 Percent Function 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-65.535 0-100 X1 Coordinate 0.0 → 0.8 0-65.535 0-100 Y1 Coordinate 0.0 → 0.8 0-65.535 0-100 Xfade X1, Y1 → X2, Y2 0-65.535 0-100 X2 Coordinate 0.0 → 0.8 0-65.535 0-100 Y2 Coordinate 0.0 → 0.
Protocol Mode 20: Source Matching, 8 bit Resolution per Function Channel 1 2 3 4 5 6 7 Reverts to fixture setting when signal lost.
Channel Value HI LO 1 2 3 4 5 6 7 8 9 Reverts to fixture setting when signal lost. 10 11 - 12 Percent Function 0-65.535 0-100 Master Intensity 0 % → 100% (open) 0-50 51-101 102-152 153-203 204-255 0-20 21-39 40-59 60-79 80-100 Category 1 Incandescent Fluorescent Discharge Other Reserved for future use 0-255 0-100 Source 1 Please see table below 0-65.
Source Matching, Light Sources Category Incandescent Flourescent Discharge Other Value 0-2 3-5 6-8 9-11 12-14 15-17 18-20 21-23 24-26 27-255 0-2 3-5 6-8 9-11 12-14 15-17 18-20 21-23 24-26 27-255 0-2 3-5 6-8 9-11 12-14 15-17 18-20 21-23 24-255 0-2 3-5 6-8 9-11 12-14 15-17 18-20 21-23 24-26 27-29 30-32 33-35 36-38 39-41 42-44 45-47 48-50 51-53 54-56 57-59 60-255 Function Tungsten Bulb Incandescent Halogen Antique Bulb Warm Antique Bulb Christmas Lights Night Light Infrared Heat Lamp Grow light Reserved
Channel 1 2 3 4 5 6 7 8 9 10 Reverts to fixture setting when signal lost.
Protocol Mode 23: Effects, 16 bit Resolution per Function Channel Value HI LO 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Reverts to fixture setting when signal lost 19 20-21 58 Percent Function 0-65535 0-100 Master Intensity 0 % → 100% (open) 0-10 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 131-140 141-255 0-4 5-8 9-12 13-15 16-20 21-23 24-27 28-31 32-35 36-39 40-43 44-47 48-51 52-55 53-100 Effect Selection No Effect Party Effect Candle Cl
Parameter 1 2 Value 8 bit Value 16 bit Percent Function 0 1-255 0 1 – 65535 0 1-100 Saturation CCT 2.800 10.000 K 0 1.0 Saturation 0-255 0 – 65535 0-100 Speed Loop 60 s 1 s Protocol Party Effect Candle Parameter 1 2 Value 8 bit Value 16 bit Percent Function 0-84 85-170 171-255 0 – 21844 21845 - 43690 43691 - 65535 0-33 34-66 67-100 CCT Range Not continuous, set range for random generation 1.400 → 1.700 K 1.700 → 2.000 K 2.000 → 2.
Protocol Color Chase Parameter 1 2 3 Value 8 bit Value 16 bit Percent Function Offset Offset Number 0 – 50 Every 5 DMX values is a new offset 0-255 0 – 65535 0-100 0-255 0 – 65535 0-100 Speed Loop 60 s → 1 s 0 1-255 0 1 – 65535 0 1-100 Saturation CCT 2.800 → 10.000 K 0 → 1.
Parameter 1 2 3 4 5 6 Value 8 bit Value 16 bit Percent Function 0-255 0 – 65535 0-100 Speed 1 → 25 flashes / second 0-255 0 – 65535 0-100 Color Temperature CCT 2.800 → 10.
Protocol Pulsing Parameter 1 2 3 4 5 6 7 Value 8 bit Value 16 bit Percent Function 0-255 0 – 65535 0-100 Frequency 5 → 90 Pulses / minute 0-255 0 – 65535 0-100 Pulse Duration 4 → 0.25 seconds 0-255 0 – 65535 0-100 Color Temperature CCT 2.800 → 10.
Overview of Typical CCT Values as DMX Values CCT value DMX value (8 bit) DMX value (16 bit) Sky-Panel C C 3.200 K 14 3.670 5.600 K 99 25.493 6.000 K 113 29.098 6.500 K 131 33.685 Equations for calculation To calculate the CCT value 8 bit CCT Value – 2800 DMX Value = ----------------------------------------28.235 CCT Value = DMX Value 28.235 + 2800 16 bit CCT Value – 2800 DMX Value = ----------------------------------------0.109865 CCT Value = DMX Value 0.