User manual

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Pulvermühle, 83071 Stephanskirchen
42
www.arri.com
5.1.2 Menu levels of the on-board control
During the operation of the lamphead the selected operating mode with the current value is displayed. On the fi rst menu level the
values for INTENSITY, CCT/HUE and GN/SAT can be retrieved via the + / - buttons. The menu point STATUS, confi rmed with
ENTER, takes you to the next level which displays information on faultless operation and the temperature. To retrieve values for
operating hours, DMX version and software version, press ENTER to jump to the third level. The FUNCT key takes you back to the
previous menu level.
Note: The horizontal arrow in the display symbolizes the possibility to jump to the next menu level by pressing ENTER.
menu level 2
menu level 1
Intensity
CCT/HUE
GRN/SAT
STATUS
SETUP
OK or ERROR
e.g. 42.1° (temperature)
HOUR (operating hours)
DMX V (DMX version)
SW (software version)
DMX (DMX settings)
menu level 3
INDC (lights on control)
FAN (fan modes)
PROT (protocol number)
CHAN
ON or OFF
OFF
LOW
HI
ALOW (from 80%)
AHI (from 80%)
VARI (at avg. 158° F)
PASS
menu level 4
e.g. P.001
e.g. C.017
Note: In setup or status mode the settings option remains active until another function is executed. In all other modes the
display will go back to the respective mode after 2 seconds.
HI 45 (only L7 Active)
display
e.g. 501 t
e.g. 3.1
e.g. 1.70.0
display
e.g. 24 %
e.g. 2900K / 16°
e.g. -0,57 / 100
ENGLISCH
ENGLISCH