User manual

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Pulvermühle, 83071 Stephanskirchen

www.arri.com

Command (English) Description

GET SET

Slot Description Shows a text description with max. 32 characters

for each DMX channel from the requested DMX

mode

yes

Default Slot Value Shows the default DMX channel value from the

requested DMX mode

yes

Sensor Deﬁ nition Shows the deﬁ nition from a speciﬁ c sensor and a

text description

yes

Sensor Value Shows the actual sensor value yes

Device Hours Shows the actual device hours of the ﬁ xture yes

Lamp Hours Shows the actual lamp hours of the ﬁ xture yes

Factory Defaults This command deletes all user parameters and

sets the ﬁ xture to factory default

yes yes

Device Power Cycles Shows the power cycle value, counts every cold

start (switch or power-up)

yes

Reset Device Fixture makes a software reset (warm start) and

carries out a reboot

yes yes

Power State Power state of the ﬁ xture, supported power states:

POWER_STATE_STANDBY (0x02),

POWER_STATE_NORMAL (0xFF),

POWER_STATE_FULL_OFF (0x00)

POWER_STATE_SHUTDOWN (0x01)

yes yes

Perform Selftest Supported test modes and demo modes yes yes

Self Test Description Shows a description for each test / demo mode yes

ENGLISCH