User manual

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Pulvermühle, 83071 Stephanskirchen

www.arri.com

5.3 Possible settings via LSeries Manager

5.3.1 LSeries-Manager 1.0.2

This software has been tested on the following operating systems:

Microsoft Windows XP (32 bit)

Microsoft Windows 7 (32 bit)

Microsoft Windows 7 (64 bit)

(Please note that this software is frequently updated, for more information see page 17.)

We cannot guarantee that the software will work properly on not tested operating systems.

Warning: Do not connect the lamphead with the computer before the installation of the LSeries Manager is complete.

5.3.2 Installing and starting the LSeries Manager

1. Visit our LSeries download center at http://www.arri.com/l-series/downloads.

2. Download the newest LSeries Manager Bundle Version. (Including the LSeries Manager and the newest ﬁ rmware version).

3. Note that the installation can only be performed with administrator rights. If your user proﬁ le does not have administrator

rights you have to start the installation ﬁ le (.exe) as follows: Right-Click on the ﬁ le - “start as Administrator”.

4. After installation, you can connect the ﬁ xture via USB cable to your PC. The LSeries Manager automatically detects the

connected lampheads. Make sure that no other DMX application is communicating with the lamphead. You can operate one

lamphead with any one USB port.

Note: When the installation is ﬁ nished, it is recommended to connect a L7 lamphead before you start the LSeries Manager for the

ﬁ rst time. This will ﬁ nalize the USB driver installation on your system and will prevent you from receiving a connection timeout error

message.

LSeries Manager home screen

ENGLISCH