User manual

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Pulvermühle, 83071 Stephanskirchen
36
www.arri.com
1.1.1 General Notes
 ARRI L Series fixtures are intended for professional use in the studio and on location and may only be
operated by qualified persons.
 Read these instructions carefully before using the device for the first time. The following text contains
important information for safe handling.
 Observe the safety instructions and warnings for your own personal safety.
 All components comply with the following European standards and directives:
Low voltage directive
EMC directive
RoHS directive
 Keep these instructions for possible subsequent owners.
 Help protecting our environment by disposing the packing material at your local recycling center.
 Use only original ARRI spare parts and accessories (more information at www.arri.com).
1.1.2. Important Safety Instuctions
 DANGER OF LIFE - MAINS VOLTAGE!
Disconnect the device from the mains voltage
before replacing a damaged fuse!
Never bridge a fuse!
 CAUTION ! Risk of burns !
The housing and the cooling fins can reach high temperatures.
Keep a safety distance of 10" (0,25 m) to adjacent surfaces on all sides.
Keep the cables away from the fixtures.
Do not cover ventilations slots and cooling fins.
 CAUTION ! High Beam Intensity !
Do not look into the light emission aperture of the fixture.
 Safety devices may only be removed for service purposes by qualified personnel !
 Do not lift or suspend the fixture at the mains cable !
 Note the technical data on page 29,30 and 31.
 Do not use the fixture or accessories if they display any visible damage on any component.
In case of damage the respective parts must be exchanged or you have to contact an
ARRI Service station (see www.arri.com).
 L7 fixtures must not be connected to dimmer systems or dimmer channels in Non-Dim mode.
Doing so will damage the electronic system of the fixture.
 Check the fixture for the following possible damage before every use:
Also read and follow the additional safety leaflet "Operating your ARRI Lampheads safely" L5.70731.E
part possible damage
inner thread
plug connections
plug
cables
housing, lens
overwound
damaged
deformed, broken, scorched
deformed, cut, scorched
fissures, cracks, deformed
1. General
1.1 Important Notes and Safety Instructions
ENGLISCH
ENGLISCH