User manual

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG, Pulvermühle, 83071 Stephanskirchen
41
www.arri.com
15
16
21
no. name short description
15 POWER-/STATUS-LED display
16 DATA display signalises a present DMX signal
17 FUNCT - button 1. function: changes between CCT & HSI mode
2. function: jump one menu level UP
18 ENTER - button 1. function: jump one menu level DOWN
2. function: confi rm settings
3. function: „fl ash“ arrow for activating quick selection
(memory button 1 = 3200K, memory button 2 = 5600K)
19 + / UP / step up value navigate within a menu level or step up values
(keep button pressed for stepping up rapidly)
20 - / DOWN / step down value navigate within a menu level or step down values
(keep button pressed for stepping down)
21 rotary knob INTENSITY set intensity
22 rotary knob CCT / HUE set color temperature or hue
23 rotary knob GN / SAT set green-magenta correction or saturation
24 memory button 1 safe or retrieve settings
25 memory button 2 safe or retrieve settings
26 display
5.1 Possible settings via on-board control
5.1.1 Overview of on-board control
Depending on the model, your lamphead is equipped with one of the fol-
lowing display or control panels:
· simple display fi eld (A)
· on-board control with LC display and intensity control (B)
· on-board control with LC display, intensity and color control (C)
A
C
B
18
17
22 23
24 25
19
20
26
Status LEDs at on-board control:
green LED lights up status OK / lamphead active
blue LED lights up receiving DMX or RDM data
red LED fl ashes at 500ms rhythm * lamphead will shortly reach over temperature
red LED lights up permanently * over temperature reached
red LED goes out and Green LED lights up * lamphead has cooled down and can be turned on again
red LED fl ashes rapidly at 250ms rhythm * calibration data could not be loaded
* display lights up red when LED is lit
ENGLISCH
ENGLISCH