User Guide

Product description
10
XLR-4 PowerDMX pin-out
The pin-out of the 4-pin XLR is:
Auto Power-off function
The LED panel is equipped with an auto power-off function to
protect the LEDs from damage by over temperature or over
voltage.
• The LED panel switches off automatically when exceeding a
dangerous heat level.
• The red status LED indicates, that the auto power-off function
is active.
• Reset the product by disconnecting and re-connecting the
power source.
Suppressor element
The BroadCaster 2 Plus is shipped with two suppressor ele-
ments. The suppressor elements can be orderd as an acces-
sory (ident number L2.0007041). Please the chapter “To attach
the suppressor elements” on page 22 for more information.
Status indicators
Intensive use causes the heat sink to become very
hot. The surface temperatures can reach up to
80° C / 176° F. Use gloves if you touch the LED panel
at the heat sink.
Do not cover the heatsink or the radiators during use.
Avoid exposure of the LED panel to the heat radiation
of other products. Do not place it on other heat
sources. Intense heating can cause automatic
power-off while using the product.
Pin Assignment
1 0 V
2 DMX Data -
3 DMX Data +
4 11 - 36 V=
Red
Over temperature or over voltage. The auto
power-off function is active.
Green The product is switched on. No error condition.
Blue The product receives a valid DMX signal.