User Guide

NiMH battery pack

The LoCaster 2 Plus battery pack can power a single

LED Panel for about two hours independent from mains

source.

To check the capacity of the battery pack:

• Push the capacity status check button on the top side of the

battery pack to display the remaining capacity with the LED

indicators.

Specification

Note: ARRI recommends the use of the described battery

system. If you use a different 24V battery system, different pin

configurations might cause malfunction. In this case please

contact your local ARRI Service Center.

Please follow the handling and safety instructions of

the manufacturer. Always observe the safety

information given by the manufacturer.

Avoid heating the device by other heat sources or by

intense radiation from the sun or other products.

Never throw it into fire.

Store the battery pack in a cool and dry place. Do not

store it at a very hot or very cold place.

Never short circuit the battery pack. Do not touch the

connector´s pins with conducting items. Do not try to

open or modify the product.

Output voltage 30 V=

Capacity 81 Wh

Dimension (l x w x h) 5.1 x 3.94 x 2.17 in

Weight 2.65 lbs

Charging status

Test button

Locking nut

to Caster stirrup