User Guide

To secure suspended loads

When the LED panel or any other component is suspended or

mounted in a hanging position, it must be secured with a safety

cable and a coupling device rated at a minimum of 10 times the

weight of the products including accessories.

The safety cable must be as short as possible.

Note: When using the LED panels in a hanging position above

people´s heads, ARRI advises using the Caster stirrup. Utilize

the stirrup as a location in which to attach a safety cable.

The safety cable (or similar system) and all of its

coupling links must be able to carry at least 10 times

the weight of the products, including accessories.

Always follow further regional regulations.

To power the LoCaster

To use a battery pack

To use the LoCaster with the battery pack, please do the

following:

• Make sure the battery pack is fully charged.

• Plug the XLR-4 connector of the battery pack into the POWER

IN connector of the LoCaster LED panel.

Note: For battery operation of the LoCaster with a

battery pack other than the LoCaster battery pack, please use

the battery cable L2.30105.0.

Always discharge the battery pack complete before

recharging. This way the lifetime of the battery pack is

extended.