User Guide
To operate the LoCaster 2 Plus
25
To operate the LoCaster 2 Plus
To operate the LoCaster 2 Plus:
• Power the system with one of the sources described. The
green status LED indicates a correct input voltage.
• Switch on the LoCaster 2 Plus using the ON/OFF switch. The
product immediately outputs light at the selected color tem-
perature and intensity.
• Turn the DIM knob to continuously adjust the intensity within
a range of 10% to 100%.
• Turn the CT knob to tune to the desired color temperature be-
tween 2800K and 6500K stepless.
• If required, it is possible to adapt the light of the product to a
possible green or magenta tint of the main light source in the
scene. Simply turn the +/- green tint correction knob to
stepless adjust.
Note: The color does not shift when dimming, not even at very
low intensities.
The intensity does not change when selecting a different color
temperature preset.
Power in
+/- green
ON/OFF switch
Color temperature knob
Status indicators
DIM knob