User Guide

To operate the BroadCaster 2 Plus

To set up the BroadCaster 2 Plus for DMX control:

• Power the BroadCaster 2 Plus unit with a valid

PowerDMX signal.

• Use the BCD selector to choose the desired DMX start ad-

dress.

The BroadCaster uses the following DMX protocol:

Notes: Both the green and the blue status indicators need to

be illuminated in order to guarantee a correct input voltage

and a valid DMX signal.

The BroadCaster requires four consecutive DMX channels.

The fourth channel is reserved for future use.

Six color temperature presets are programmed from BCD

selector DMX start address no. 900 through 905 for backup

and testing reasons. The color temperatures are 2.800K,

3.200K, 4.000K, 4.800K, 5.600K and 6.500K.

PowerDMX output

You can connect additional LED panels to the PowerDMX out-

put of the BroadCaster unit:

• Connect another BroadCaster unit to the first one using a

XLR-4 cable.

• Use the BCD selector to choose the desired DMX start

address.

DMX address function description

DMX address Intensity 0-100% (log)

DMX address + 1 Color temperature 2.800 K - 6.500 K

DMX address + 2 +/- Green +/- Green

DMX address + 3 no function

PowerDMX IN

PowerDMX OUT

Status indicators

BCD selector