User Guide
Safety Information
6
General Safety Information
Read and understand all safety information and
operation instructions before you operate or install
the product.
Use only genuine spare parts or accessories that
have been recommended or approved by ARRI.
Other accessories or spare parts may cause hazards,
damage the product or invalidate the warranty.
Check all cables and devices for visible damage
before you work with the system. Defective electric or
electronic devices must not be used. Take special
care of the following components:
In the event of visible damage to the product or
accessory, the product or accessory must no longer
be used. Replace or repair the respective part. In
case of repairs, please contact an authorized ARRI
service center.
Never attempt to repair any part of the product on
your own. Maintenance and repair work is only to be
carried out by authorized ARRI service centers.
Do not operate the product if the ambient tempera-
ture exceeds 45° C. Do not expose the product to rain
or moisture.
Do not bypass any safety feature of the product.
Do not open the product. There are no user service-
able parts inside. The housing is sealed with an adhe-
sive seal that will break immediately when trying to
open the housing. Doing so will invalidate the
guarantee, where applicable.
In addition to regular visible checks ARRI recom-
mends that all electric components are checked for
electrical safety by a professional every 12 month.
Keep the protocol of the check.
Component Possible damage
Housing,lens Cracks,cuts,deformation
Cables Cuts,deformation,burns
Connectors Cracks,deformation,burns
Cableconnectors Damaged
Innerthreads Overwound