Instruction manual

22
23
5.3 Remote Lens Control
Lens Motors
Both CLM-1 and CLM-2 motors can be used with the FEM-2.
• The CLM-1 motors are connected to the LCS bus
sockets photo.
• The CLM-2 motors should be connected to the zoom,
focus and iris sockets photo on the CLM-2 plug-in
module.
Note: CLM-1 motor function has priority over the
CLM-2 motor.
If a CLM-1 motor is set to the function zoom, focus or iris
and is connected to the FEM-2, the corresponding CLM-2
connection is deactivated.
Each CLM-2 motor connection has a direction switch
photo and a status LED photo.
LCS-bus sockets
Status LEDs
direction switches
IRIS socket
FOCUS socket
ZOOM socket
Operating