Instruction manual
6
7
Do not operate the system in high humidity
areas or expose it to water or moisture.
Do not place the system on an unstable cart,
stand, tripod, bracket, or table. The system
may fall, causing serious personal injury and
damage to the system or other objects.
Operate the system using only the type of power
source indicated in the manual. Unplug the power
cord by gripping the power plug, not the cord.
Never insert objects of any kind into the any part
of the system through openings, as the objects
may touch dangerous voltage points or short out
parts. This could cause re or electrical shock.
Unplug the system from the power outlet before
opening any part of the system or before making
any changes on the systems, especially the
attaching or removing of cables.
Do not touch optical surfaces!
Do not use force!
Clean optical surfaces only with a lens brush
or a clean lens cloth! In cases of solid dirt
moisten a lens cloth with pure alcohol.
Do not use solvents in cleaning!
Do not remove any screws which are secured
with paint!
Any violation of this safety instructions or the non-observance
of personal care could cause serious injuries (including death)
and damages on the system or other objects.
Product Specications
In the case of inquiries or when ordering parts, please
advise serial number and model.
Explanation of the Symbols in the Manual
Note: Indicates important remarks and cross references.
photo indicates objects which are shown in the
photographs or drawings.
Disclaimer