User`s guide

ARRICAM Accessories Quick Guide 01/2004, Page 19 of 24
Wired Handgrip Attachment
The Wired Handgrip Attachment (WHA-2) allows the use of the following hand controllers of the Wireless Lens
Control System (WLCS) via cable connection: Either the Wireless Focus Unit and the Wireless Zoom Unit (singly
or combined), or the Wireless Remote Control.
The WHA-2 can also be connected to the FEM-2 of the 435 Advanced.
On the ARRICAM up to two WHA-2s may be connected; one via the Lens Data Box’s LCS connectors and the
other via the camera’s CAC connector.
Note: Although the Lens Data Box has two LCS connectors, the use of two WHA-2s connected to the LDB
simultaneously is not supported.
Mounting
• The hand controllers clip onto the WHA-2.
Note: The FOCUS knob of the WFU-3 is ergonomically better positioned for use on the WHA-2 than that of the WFU-1.
• The WHA-2 itself can be mounted with its Dovetail Shoe to several ARRI Dovetail parts like the Dovetail 3/8”
Clamp, the WHA-2 Rod Bracket or the WHA-2 Rosette Bracket.
Cable connections
• Use cable LC-M1-SP-S (1m/3ft) or LC-Z1-S (2m/6ft) to connect to either a Lens Data Box (LCS connector), the
Remote Control Station (WHA-2 connector) or to a CLM-1 motor which is already connected to the Lens Data
Box.
• Use cable KC 70-S (3m/9ft) to connect either to the Camera Accessory Connector (CAC) on the camera or
to the CAC Distribution Box.
• Use cable LC-M1-SP-S (1m/3ft) or LC-Z1-S (2m/6ft) to connect to either the FEM-2 (LCS connector) of a 435
Advanced or to a CLM-1 motor which is already connected to the FEM-2.
RUN button
Lens calibration
(CAL) button
Lens calibration
LED
Dovetail Shoe
Wired Handgrip
Attachment (WHA-2)
WHA-2
connector
RELEASE
button
Wireless Focus
Unit (WFU-1)