User`s guide

ARRICAM Accessories Quick Guide 01/2004, Page 20 of 24
Accessory Shoe
Lens Data Display (LDD) connector
RUN LED
FPS display
SHUTTER display
BAT LED
EXPOSED FILM
display
BRIGHT button
RESET button
RAW STOCK button
Accessory
Shoe
camera left side
The Studio Readout can only be used mounted on top of a Studio Viewfinder or Studio Universal Viewfinder.
It has an FPS display and RUN LED on both sides. The left side also has SHUTTER and EXPOSED FILM displays.
The FPS and SHUTTER displays will either show the camera’s current values or, when necessary, messages
and warnings (see Studio Quick Guide, Lite Quick Guide or ARRICAM User’s Guide for listings of messages
and warnings).
The Studio Readout also has an LDD connector (other components with an LDD connector are the Lite Mask
Frameglow and the Remote Control Station).
Functions
• Pressing the RAW STOCK button shows the film reserve instead of the EXPOSED FILM length.
• Pressing the RESET button for more than 3 seconds resets the EXPOSED FILM counter to zero.
• Each press of the BRIGHT button steps through dim, medium and maximum brightness of all displays,
including the Lens Data Display Classic (LDD). This does not affect the LDD-FP, which has its own
brightness setting in a sub-menu.
RUN and BAT LEDs
• The RUN LED glows green when the camera is running at its preset fps. It glows red when the camera is
either running up or down or the camera is not ready.
• The BAT LED glows red when the power supply voltage drops below the low battery warning threshold.
Studio Readout