User`s guide
ARRICAM Accessories Quick Guide 01/2004, Page 23 of 24
The Universal Low Mode Set allows the Studio or the Lite to be underslung on a Steadicam. The set consists
of a Steadicam Plate, two Support Arms, a Lite Mounting Plate and a Support Rod Holder. The Support Rod
Holder slides into a dovetail located on the front of both 100% Video Tops and has to be fixed by a single 3
mm hex screw in the correct position on both the Studio and the Lite. The Lite Mounting Plate is not required for
the Studio.
Mounting on the Studio
• Fix both Support Arms to the threaded holes on the left and right side of the Studio with a 3 mm metric hex wrench.
Mounting on the Lite
• With the Viewfinder removed from the camera, first attach the Lite Mounting Plate.
• Now fit the Lite Integrated Video System onto either a Lite 100% Video Top, Lite Viewfinder or Lite Universal
Viewfinder.
• Attach the Support Arms to the Lite Mounting Plate.
• Finally, attach the Steadicam Plate to the top of the Support Arms with the four 3 mm hex screws .
Steadicam Plate
Support
Rod Holder
mounting
screws
Left Support Arm
Lite Mounting Plate
Universal Low Mode Set
19mm rods
15mm rods
Lite Mounting
Plate