Instruction manual

WMU-3

+ WFU-3

WMU-1 / WMU-2

+ WZU-1

+ WFU-1

As operating the handwheel and the slider is independent

from the particular lens ring (focus or iris), only operation

of the handwheel and the slider is described in the

following two chapters.

5.1.5.1 Attaching the WFU to the WMU

• Switch off the WMU with the ON key.

• Insert the WFU with its wide black pin facing it ➪ photo

into the free space on the WMU or on the WZU, then

push the WFU onto the WMU or the WZU until the

module clicks in audibly.

Note: Do not separate the manual control units from

each other while switched on as this could lead

to functional errors, e. g. unintentional alteration

of lens end stops.

Operation

black pin