Instruction manual

100
5.1.5.2 Determining whether the handwheel
should control focus or iris
• Turn the switch ➪ photo in the middle of the operating
field of the WFU to the desired position.
To operate focus with the handwheel, push the switch
in the direction of the rotary knob.
5.1.5.3 Operating the handwheel on the WFU
• Prior to operation, the end stops of the used lens must
be calibrated (see chapter 5.1.3.6 Calibration).
Focus or Iris Adjustment
• Adjust the handwheel ➪ photo of the WFU.
The lens ring follows the handwheel adjustment very
precisely and smoothly.
When quickly turning the handwheel, focus and iris ad-
justment follows with the maximum speed of the lens control
motors (at 12V the maximum adjustment speed is lower).
Operation
switch
LENS-key
(handwheel)
locking screw
handwheel
LENS-key
(slider)
KNOB-key
end stops