Instruction manual

106
5.1.6 WRC-1 (Wireless Remote Control)
The WRC-1 enables the user to remotely control
• the camera speed,
• the shutter angle of the mirror shutter, and
• the aperture of the lens (iris),
providing a wide range of compensation options for
constant exposure.
WRC-1 and LDD-FP can not be operated together
on the same WMU-3
WZU-1 and WZU-3 can not be attached and
operated between the WMU and the WRC-1.
Note: Software version 1.08 or newer is necessary to
operate with the WMU-2, WMU-3, URM-2,
URM-3, LDB-ST-2 and LDB-LT-2.
The WRC-1 can be connected to all Wireless Main Units.
Using the WHA-1 on the ARRIFLEX 435, or the WHA-2
or WHA-3 on the ARRICAM or ARRIFLEX 435 Advanced
it can be used in a hardwired configuration.
• Switch off the WMU with the ON key.
SET-key
RAMP-key
WRC/CAM sliding switch
WRC
rotary switch
IRIS sliding switch
SEL-key
MODE-key
OPEN/PHASE-
key
handwheel
READY-LED
COMPENSATION-
rotary switch
RUN-LED
Operation