Instruction manual

107
• To detach another unit if attached, press the RELEASE-
button ➪ photo, swing away the other unit and pull
up to remove it.
• Insert the WRC-1 with its wide black pin ➪ photo facing
into the free space on the WMU, then press the WRC-1
onto the WMU until the module clicks in audibly.
For the operation of the WRC-1 please refer to the
respective instruction manual (K2.43660.0 German or
K2.43668.0 English).
ON-key
RELEASE-button
remote channel
RF-LED
CAL-LED
CAL-key
READY-LED
BAT-LED
RUN-LED
RUN-key
black pin
Operation