Instruction manual

116
Attaching the Extension WEU-1
RELEASE button
Operation
The LDD-FP can not be used with the WHA-1,
WHA-2 or WHA-3. The WHA-2 and the
WHA-3 are not compatible with the UMC-1.
• Switch off the WMU with the ON key.
• To detach a WFU, press the RELEASE button ➪ photo,
swing away the WFU and then pull upwards to
remove it.
• Insert the WMA-1 (Wireless Main Attachment) with
the wide black pin facing into the free space on the
WMU or WZU, then press the WMA-1 onto the WMU
or WZU until the module clicks in audibly.
• Insert the WZU or the WFU with its wide black pin
facing into the free space of the Wireless Handgrip
Attachment WHA, then press the WZU or WFU onto
the WHA until the module clicks in audibly.
• Connect the two attachment pieces WHA and WMA-1
to each other with a cable WC-E1 ➪ photo or WC-E2.