Instruction manual

122
Operation
5.2.2.2 Resuming operation after a break
with power down
If a lens ring was moved manually while the LCS was
switched off, the stored values for the lens end stops will
no longer be correct. So:
• Switch on the LCS and recalibrate.
5.2.2.3 Battery Control (BAT)
When the battery control LED (BAT) ➪ photo on the
zoom unit flashes, replace the battery.
Do not start any new scenes!
• If the battery control LED flashes, replace the battery
immediately (danger of completely discharging the battery).
The battery control reacts to the following voltage limits:
Battery BAT-LED Voltage
24V illuminated <20V
flashing <18V
12V illuminated <10V
flashing <9V
POWER-key
READY-LED
CAL-key
SET-key
BAT-LED
CAL-LED
SET-LED