Instruction manual

124
Operation
5.2.2.5 Zooming
• Turn the zoom lever ➪ photo in the desired direction.
The focal distance will be altered. The greater the
deflection, the faster the zoom will react.
5.2.2.6 Defining the zoom range
For focal length adjustment, a defined range can be
selected and stored.
• Drive the zoom control ring to the beginning of the
selected range.
• Press the SET key ➪ photo, and hold down.
The SET-LED ➪ photo will flash quickly.
• Drive the zoom control ring to the end of the selected
range, and release the SET button. The SET-LED will
now be illuminated.
When redefining the zoom range, the range can only be
smaller. If this is not desired, the zoom range must first be
erased and then redefined.
5.2.2.7 Erasing the zoom range
• Press the SET key ➪ photo and hold down briefly.
The SET-LED ➪ photo switches off.
zoom lever