Instruction manual

139
FIU-1
Operation
5.2.4 Operating the FIU-1
(Focus Iris Unit)
With an FIU-1 ➪ photo either a focus ring or an iris ring
can be remotely controlled. For use of the FIU-1 a ZMU-1
or ZMU-2 is always necessary as a main unit. The first FIU-1
is connected to the ZMU with a cable LC-F1 or LC-F2. If a
second FIU-1 is used, this can be connected to the first
FIU-1 with a cable LC-F1 or LC-F2.
5.2.4.1 Defining the function of the FIU-1
Switch on the FIU-1 with the ZMU. Before switching on, it
is necessary to determine whether the FIU-1 is to control a
focus ring or an iris ring.
• Using a coin, turn the switch Focus/Iris ➪ photo to
the desired position.
Note: If only one FIU-1 is used, the function (focus/iris)
can also be altered while switched on.
handwheel
fixing screw
LENS-key
LENS-LED
READY-LED
CAL-LED
KNOB-key
KNOB-LED
Fokus/Iris switch
mechanical end
stops