Instruction manual

147

Operation

5.2.6.2 Playback

• Select the desired memory bank.

• To set the starting positions:

press the PLAY key. During the search for the start

positions, the PLAY-LED will ﬂash quickly; once the

positions have been reached, the LED will ﬂash slowly.

The LCS is ready for playback. This status can be

cancelled by pressing the MEM key.

If there is no recorded data in the memory banks, both

memory bank LEDs will ﬂash, and the READY-LED on

the zoom unit will be illuminated red. Select the correct

memory bank!

• To start playback:

connect the trigger contacts. During playback the

PLAY-LED will be illuminated.

• To stop playback:

press the PLAY key again or wait until the entire

sequence has been played back.

1 TRIG + Activate trigger mode by

2 TRIG - connecting both contacts

3 – not connected

4 – not connected