Instruction manual

168
WHA-2
Operation
5.2.8 WHA-2
Wired Handgrip Attachement
To operate the WHA-2 with the ARRIFLEX 435
Xtreme/Advanced a FEM-2 must be attached to the
camera.
With the WHA-2 ➪ photo the hand units of the wireless
Lens Control System (WFU-1, WFU-3 and/or WZU-1,
WZU-3) or the WRC-1 can be operated hardwired with
the ARRICAM or an ARRIFEX 435 Xtreme/Advanced.
• Connected the WHA-2 to the LCS socket of a Lens Data
Box with cable LC-M1, LC-M2, LC-Z1 or LC-Z2, or
• with the cable KC-70 (3m/9ft) to the CAC connector
of ARRICAM ST or LT
For lens control on an ARRICAM, a Lens Data
Box must be present.
The LDD-FP can not be attached to the WHA-2.
The WHA-2 is not compatible with the UMC-1.