Instruction manual

170
Operation
5.2.11 LDD Lens Data Display Classic
The LDD ➪ photo can be used on an ARRICAM or an
ARRIFLEX 435 Xtreme/Advanced or remotely, for instance
when the camera is on a crane.
To operate the LDD a Lens Data Box must be
attached to an ARRICAM, or a FEM-2 to an
ARRIFLEX 435 Xtreme/Advanced. LDS compatible
lenses must be used.
The LDD shows lens ring position and camera status. The
LDD graphically shows depth of field, and allows for the
setting, display and storage of focus marks.
• Connect the LDD with the cable KC-60 (0.5m/1.5ft) or
KC-79 (3m/9ft) to the Studio Readout of the ST or to
the Lite Mask Frameglow of the LT.
• Alternatively cables KC-67 (3m/9ft) or KC-68
(15m/45ft) can be used to connect the LDD Classic to
the CAC connectors of the ST or LT.
• For remote operation the LDD can also be connected
to the ARRICAM Remote Control Station (K2.54143.0)
with cables KC-60 or KC-79.
For setup and operation of the LDD Classic please refer to
the ARRICAM instruction manual (K2.58508.0).