Instruction manual

171

Operation

5.2.12 LDD-FP Lens Data Display for

the Focus Puller

The LDD-FP ➪ photo can be used in a wireless conﬁgu-

ration with the WMU-3, as well as hardwired with an

ARRICAM or the ARRIFLEX 435 Xtreme/Advanced, for

instance when the camera is on a crane.

To operate the LDD-FP a Lens Data Box must be

attached to an ARRICAM, or a FEM-2 to an

ARRIFLEX 435 Xtreme/Advanced. LDS compatible

lenses must be used.

The small and lightweight LDD-FP shows important lens

informations and camera status. It can be conﬁgured to

show focus, zoom and iris scale and the camera status in

any combination. The LDD-FP graphically shows depth of

ﬁeld, and allows for the setting, displaying and storage of

focus marks. Because of its small size it can be mounted

in many ways, allowing the assistant to see precise lens

and camera information while keeping an eye on the action.

• The cable LDDFP-RDO (0.6m/2ft) connects the LDD-FP

to the Studio Readout or to the Lite Mask Frameglow.

• With cable LDDFP-CAC (1.5m/5ft) the LDD-FP is

connected to the CAC socket of the ARRICAM ST or LT.

• Using the LDDFP-RDO cable it can be connected to the

ARRICAM Remote Control Station (K2.54143.0).

Do not use the LDDFP-CAC cable

with the cable drum.

• The LDD-FP can also be attached to the WMU-3,

either directly or using the WEB-3 Expansion bracket

for a wireless conﬁguration.

For setup and operation of the LDD-FP please refer to the

ARRICAM instruction manual (K2.58508.0).