Instruction manual

174
Mechanical Acessories
Mounting diminishing brackets
on the motor unit CLM-2
• Flip up the clamp brackets ➪ photo on the motor unit
CLM-2.
• Place the diminishing brackets ➪ photo into the
clamp bracket of the motor unit CLM-2.
• Fasten the diminishing brackets externally with two
screws each.
Mounting the diminishing brackets
on the console
• Flip up the locking lever ➪ photo and unscrew the
ballcatch ➪ photo with a screwdriver until it completely
disappears in the bracket.
• Push the tube with the slit ➪ photo flush into the
console socket ➪ photo, ensuring that the slit in the
tube corresponds with the clamp slit.
• Fix the diminishing tube with two screws from the
outside.
diminishing brackets
clamp brackets