Instruction manual

187
Trouble-Shooting
Problem Cause Remedy
7.6 WFU Wireless Focus Unit LEDs
LENS-LED (slider) illuminated red no motor unit installed for slider install motor for slider
The slider on the WFU is not active a different WFU has the control over the lens ring operated
(has no control over a motor) by the slider. If a different WFU is switched on,
and its handwheel is aligned to the same ring as the slider,
this WFU has control.
LENS-LED (handwheel) illuminated red no motor unit installed for handwheel install motor for handwheel
The handwheel on the WFU is not active A different WFU already has control of the
(has no control over a motor) aligned lens ring. The first unit switched
on always has control.
Exception: the FIU-1 units always lose control
when a WFU is switched on.
LENS LED and READY-LED the handwheel of the WFU on the WMU avoid assigning the same control function twice
flashing red that was switched on last is assigned set the WFUs to different control functions
to the same function as the WFU/WMU and switch the WMU off and on again
already in operation