Instruction manual

19
CLM-1 Controlled Lens Motor
K2.41378.0
The main features of the motor units CLM-1 ➪ photo are
their high torque; they are particularly suited to work with
stiff lenses or in cold weather. The vertical mounting allows
the motor unit to be attached even when the available space
for the set-up is restricted. The motor units can be installed
on and removed from the fully equipped camera. The matte
box does not need to be removed.
CLM-2 Controlled Lens Motor
K2.52036.0
The small, lightweight motor units CLM-2 ➪ photo are
particularly suited to applications for which weight and size
are decisive factors, for example Steadicam shots, when
using 16mm or video cameras, or with sensitive lenses.
As with the CLM-1 motor units the vertical mounting enables
working in particularly tight conditions. The consoles to the
motors enable very flexible mounting.
Note: CLM-2 motor units can be directly connected to
the Lens Data Box of an ARRICAM, or to the
FEM-2 on an ARRIFLEX 435 Xtreme/Advanced.
For all other camera models a UMC motor
controller is necessary.
System Overview