Instruction manual

21
UMC-1 Universal Motor Controller
K2.52040.0
The universal motor controller UMC-1 ➪ photo is used to
control the CLM-2 motors on the camera. Up to three CLM-2
motors (zoom, focus, iris) can be controlled. Mixed
operation with CLM-1 and CLM-2 motors is also possible.
The functions of the UMC are already incorporated in
the FEM-2 or a Lens Data Box of an ARRICAM.
Parallel operation of the UMC with a respectively
equipped ARRICAM or ARRIFLEX 435 Xtreme/
Advanced is not recommended!
UMC-3 Universal Motor Controller
K2.65000.0
The universal motor controller UMC-3 ➪ photo is used to
control the CLM-1/2 motors on the camera. Up to three
CLM-1/2 motors (zoom, focus, iris) can be controlled. A
serial interface and a LDD/LDD-FP interface is integrated
in order to display digitally stored lens data.
URM-1 Universal Radio Module
K2.52048.0
The Universal Radio Module URM-1 ➪ photo is mounted to
the UMC-1 and provides the radio connection to the WMU-1.
The radio modem of the URM-1 is not compatible
with the radio modem of the WMU-2, WMU-3,
URM-2 and URM-3.
Note: The radio modems of the "-1" series can be
exchanged to the new standard modems at any
ARRI Service Center.
URM-2 Universal Radio Module
The Universal Radio Module URM-2 ➪ photo is already
equipped with a new standard radio modem and offers
the same fuctions as the URM-1. The URM-2 is mounted
to the FEM-2 or the UMC-1 and provides the radio
connection to the WMU-2 or WMU-3.
URM-3 Universal Radio Module
K2.52262.0
The Universal Radio Module URM-3 ➪ photo is mounted
to the FEM-2 on an ARRIFLEX 435 Advanced or to the UMC-1
and provides the radio connection to the WMU-2 or WMU-3.
Due to the different radio modem the URM-3 is
not compatible with URM-1 and WMU-1.
System Overview