Instruction manual

29
WEB-3 Wireless Expansion Bracket
K2.52241.0
The Wireless Expansion Bracket WEB-3 ➪ photo is
mounted on the side of the WMU-3 and allows the
attachement of up to 3 ARRI control units on one WMU-3.
The following combinations are possible:
• LDD-FP and WFU-1 or WFU-3
• LDD-FP and WZU-1 or WZU-3
• LDD-FP and WFU1 or WFU-2 and one
WZU-1 or WZU-3
• LDD-FP and WFU-1 or WFU-2 and ZMU-3
• Two WFU-1 or WFU-3
• Two WFU-1 or WFU-3 and one
WZU-1 or WZU-3
• Two WFU-1 or WFU-3 and ZMU-1
• WRC-1 and WFU-1 or WFU-3
• WRC-1 and WFU-1 or WFU-3 and one
WZU-1 or WZU-3
• WRC-1 and WFU-1 or WFU-3 and ZMU-3
Note: The LDD-FP and the WRC-1 are using the same
interface, therefore simultaneous operation of
both units on one WMU-3 is not possible.
Note: In wireless mode the battery capacity depends
strongly on the set illumination level of the
display. For longer battery life reduce the
display illumination to the necessary minimum.
WZB-3 Wireless Zoom Bracket
K2.65017.0
The Wireless Zoom Bracket WZB-3 ➪ photo is mounted
on the left side of the WMU-3 and allows for the mechanical
attachement of the ZMU-3.
Note: Parallel operation of the WZU-1/3 and the
ZMU-3 is not possible.
System Overview