Instruction manual

31
System Overview
LDD Lens Data Display Classic
K2.54012.0
The LDD ➪ photo displays lens ring position and camera
status. The LDD graphically shows depth of field, and allows
for the setting, display and storage of focus marks. It can
be used on an ARRICAM or an ARRIFLEX 435 Xtreme/
Advanced or remotely, for instance when the camera is
on a crane.
The Lens Data Display Classic can be connected to the
respective Lens Data Box or the FEM-2. Cables KC-60
(0.5m/1.5ft) or KC-79 (3m/9ft) can be used to connect
the LDD on the Studio to the Studio Readout of the Studio
camera, or to the Lite Mask Frameglow of the Lite camera.
Alternatively, cables KC-67 (3m/9ft) or KC-68 (15m/45ft)
connects the LDD Classic to the CAC connectors of Studio
or Lite. For remote operation it can also be connected to
the ARRICAM Remote Control Station (K2.54143.0) with
cables KC-60 or KC-79.
LDD-FP
Lens Data Display for the Focus Puller
K2.54163.0
The LDD-FP ➪ photo is a small and lightweight Lens
Data Display showing important lens informations and
camera status. It can be configured to show focus, zoom
and iris scale and the camera status in any combination.
The LDD-FP graphically shows depth of field, and allows
for the setting, displaying and storage of focus marks.
Because of its small size it can be mounted in many ways,
allowing the assistant to see precise lens and camera
information while keeping an eye on the action. Together
with the WMU-3 the LDD-FP can also be used in a
wireless configuration.
The LDD-FP can be connected to the ARRICAM as long as
the respective Lens Data Box is present and to the ARRIFLEX
435 Xtreme/Advanced through the FEM-2. The cable
LDDFP-RDO (0.6m/2ft) connects it to the Studio Readout
or to the Lite Mask Frameglow. With cable LDDFP-CAC
(1.5m/5ft) the LDD-FP can be connected to the CAC
connectors of Studio or Lite. For remote operation it can
be connected to the ARRICAM Remote Control Station
(K2.54143.0) with cable LDDFP-RDO.
Do not use the LDDFP-CAC cable
with the cable drum.