Instruction manual

33
System Overview
WRC-1 Wireless Remote Control
K2.52087.0
The Wireless Remote Control WRC-1 ➪ photo is a handy
remote control unit for use with all of the latest generation of
ARRICAM and ARRIFLEX camera models: ARRICAM ST and
LT, ARRIFLEX 16SR 3 / Advanced, 16SR 3 HS / Advanced,
535, 535B, 435, 435ES and 435 Xtreme/Advanced.
It enables the user to remotely control
• the camera speed,
• the shutter angle of the mirror shutter, and
• the aperture of the lens (iris),
providing a wide range of compensation options for
constant exposure.
The range of functions offered by the WRC-1 is automatically
adapted to the limits of the camera and the lens control
motor to which it is connected. The large handwheel permits
sensitive adjustment of operational values, and easy pro-
gramming of end-stops for user-defined minimum and
maximum values.
The illuminated LCD provides quick, precise and compre-
hensive information about all the settings, the status of the
camera and the WRC-1, including all warnings.
The WRC-1 can be connected to all Wireless Main Units.
Using the WHA-1, WHA-2 or WHA-3 it can be used in a
hardwired configuration. In this case remote lens control
functions are not available.
WRC-1 and LDD-FP can not be operated together
on the same WMU-3
WZU-1 and WZU-3 can not be attached and
operated between the WMU and the WRC-1.
Note: Software version 1.08 or newer is necessary to
operate with the WMU-2, WMU-3, URM-2,
URM-3, UMC-3, LDB-ST-2 and LDB-LT-2.
For the operation of the WRC-1 please refer to the
respective instruction manual (K2.43660.0 German or
K2.43668.0 English).