Instruction manual

Setup

To power from the battery

Code Description Connection between Length / m Plug with no. pins

UC-A1 Power cable UMC-1 Battery / UMC-1 or UC-S1 2 XLR 3* Fischer 3

LC-S1 Power cable CLM-1 (NOT for 435 Advanced) Battery / CLM-1 4.5 XLR 3* Fischer 5

LC-A1 Battery cable (NOT for 435 Advanced) Battery / Power cable 0.15 XLR 4* XLR 3*

LC-A2 Battery cable (NOT for 435 Advanced) Battery / Power cable 0.15 XLR 5* XLR 3*

For remote RUN and to power from the camera

Code Description Connection between Length / m Plug with no. pins

UC-C1 Supply UMC-1 from 435, 535, 535B, 16SR3 Camera / UMC-1 1 Fischer 3 Fischer 3

LC-S2 Supply CLM-1 from 435, 35III, 35BL, 16SR2 Camera / CLM-1 0.8 Fischer 11 Fischer 5

(NOT for 435 Advanced)

LC-S3 Cable CLM-1 from 435+FEM, 535, 535B, 16SR3 Camera / CLM-1 0.8 Fischer 9 Fischer 5

(NOT for 435 Advanced)

KC-97-S Supply UMC-3 from 235 Camera / UMC-3 0.4 Fischer 11 Fischer 16

KC-98-S Supply UMC-3 from 235, 435, 535, 16SR3, ARRICAM Camera / UMC-3 (24V) 0.5 Fischer 3 Fischer 16

KC-99-S Supply UMC-3 from 435, 535, 16SR3 Camera / UMC-3 (24V) 1.0 Fi. 8 + 9 Fischer 16

KC-103-S Supply UMC-3 from Moviecam Camera / UMC-3 (24V) 0.5 Fischer 3 Fischer 16

KC-104-S Supply UMC-3 from Aaton XTR16 Camera / UMC-3 (12V) 0.5 Lemo 6 Fischer 16

KC-108-S Supply UMC-3 from 12V ARRIFLEX Camera / UMC-3 (12V) 0.5 Fischer 11 Fischer 16

KC-91-S Supply ZMU-3 from 235, 435, 535, 16SR3, ARRICAM Camera / CLM-2 / ZMU-3 1.3 Fi. 3 + 12 Lemo 19

*) assignment of pin contacts see page 53