Instruction manual

Setup

For remote RUN when using a UMC-1 as well as to power from the camera or a battery

Code Description Connection between Length / m Plug with no. pins

UC-S1 UMC-1 Connection with UC-C2 C4, C5 cable RUN cable and battery / UMC-1 0.8 Fischer 7 and 3 Fischer 3

to the camera and connection to the battery with UC-A1

UC-C2 RUN cable with 435, 35III, 35BL, 16SRII Camera / UC-S1 1 Fischer 11 Fischer 7

(NOT for 435 Advanced)

UC-C4 RUN cable with 535, 535B, 435+FEM, 16SR3 Camera / UC-S1 1 Fischer 9 Fischer 7

UC-C5 RUN cable 535B, 435, 16SR3 Camera / UC-S1 1 Fischer 3 Fischer 7

For remote RUN when using an LC-S1

Code Description Connection between Length / m Plug with no. pins

LC-C1 RUN cable with 435+FEM, 535, 535B, 16SR3 Camera / LC-S1 1 Fischer 9 Fischer 6

(NOT for 435 Advanced)

LC-C2 RUN cable with 435, 35III, 35BL, 16SR2 Camera / LC-S1 1 Fischer 11 Fischer 6 and XLR 3*

(NOT for 435 Advanced)

To cable the cable manual control units

Code Description Connection between Length / m Plug with no. pins

LC-M1 Motor cable CLM-1 / CLM-1 1 Fischer 5 Fischer 5

LC-M2 Motor cable CLM-1 / CLM-1 0.2 Fischer 5 Fischer 5

LC-Z1 Zoom cable ZMU-1 / CLM-1 3.5 Fischer 5 Fischer 5

LC-Z2 Zoom cable ZMU-1 / CLM-1 7 Fischer 5 Fischer 5

LC-E1 Zoom cable extension LC-Z1 or LC-Z2 / CLM-1 75 Fischer 5 Fischer 5

LC-F1 Focus cable ZMU-1 or FIU-1 / FIU-1 2 Fischer 10 Fischer 10

LC-F2 Focus cable ZMU-1 or FIU-1 / FIU-1 0.2 Fischer 10 Fischer 10

KC-92-S Zoom cable ZMU-3 / LCS bus 0.8 Lemo 19 Fischer 5

KC-93-S Zoom cable ZMU-3 / LCS bus 10 Lemo 19 Fischer 5

KC-105-S connection for wireless operation ZMU-3 ZMU-3 / WMU-3 0.3 Lemo 19 MSubD 15