Instruction manual

57
• When using an LC-S1 cable, connect the first motor with
the LC-S1 and additional CLM-1 motors to each other
with LC-M1 or LC-M2 cables.
The LC-S1 cable can not be used with a FEM-2
• When using a UMC, a LDB or a FEM-2 connect the
first motor with an LC-M1 or LC-M2 cable to the LCS-
socket on the UMC. Connect the additional CLM-1
motors to each other with LC-M1 or LC-M2 cables.
The functions of the UMC-1 are already incorporated
in the FEM-2 or a Lens Data Box of an ARRICAM.
Parallel operation an UMC with a respectively
equipped ARRICAM or ARRIFLEX 435 Xtreme/
Advanced is not recommended!
CLM-1 motor mounted at an ARRIFLEX 35 III
Setup