Instruction manual

61
Connecting the CLM-2 to the Lens Data Box
on the ARRICAM
• Attach the plug of the motor unit CLM-2 to the respective
socket ➪ photo of the lens ring to control on the Lens
Data Box.
• Select the drive direction with the switch (L/R) ➪ photo
on the Lens Data Box.
Note: The operational direction of the motor can be altered
at any time (except during the calibration process).
Note: The LDB already contains the radio mudule – no
extra module is needed for wireless remote control.
Connecting the CLM-2 to the FEM-2
on the ARRIFLEX 435 Xtreme/Advanced
• Attach the plug of the motor unit CLM-2 to the respective
socket ➪ photo of the lens ring to control on the FEM-2.
• Select the drive direction with the switch (L/R) ➪ photo
on the FEM-2.
Note: The operational direction of the motor can be altered
at any time (except during the calibration process).
Danger of injury: After switching the drive direction
the focus and iris motors automatically move.
drive direction switches
iris
zoom
focus
Setup