Instruction manual

62
Connecting the CLM-2
to the UMC-1 Motor Controller
• Attach the plug of the motor unit CLM-2 to the socket
➪ photo of the universal motor controller UMC-1
which corresponds to the lens ring.
• Select the drive direction with the switch (L/R) ➪ photo
on the universal motor controller UMC-1.
Note: The operational direction of the motor can be altered
at any time (except during the calibration process).
Danger of injury: After switching the drive direction
the focus and iris motors automatically move.
Attaching the URM (Universal Radio Module)
to the UMC-1 (Universal Motor Controller)
For radio operation of the ARRIFLEX 535, 535B, 435, 435ES
and the 16SR 3 series, as for models from other manufacturers
the UMC-1 ➪ photo must be equipped with a URM ➪ photo.
According to the system in use URM-1, URM-2 or URM-3
modules can be attached. Compatible are:
• URM-1 with the WMU-1 (and LDB-ST and LDB-LT), or
zoom focus iris
drive direction switches
antenna
screw
screw
UMC-1
URM-1
Setup